E-Flite Power 46 Brushless Outrunner Motor, 670Kv

$147.00

Out of stock

Power 46 Brushless Outrunner Motor, 670Kv

The E-Flite Power 46 is designed to deliver clean and quiet power for .40 to 46-size sport and scale airplanes weighing 1.8–3.2kg (4 to 7 pounds), 25- to 40-size 3D airplanes up to 2.2kg (5 pounds), or models requiring up to 925 watts of power.

Out of stock

SKU: EFLM4046A Category:

Description

Power 46 Brushless Outrunner Motor, 670Kv

The E-Flite Power 46 (EFLM4046A) is designed to deliver clean and quiet power for .40 to 46-size sport and scale airplanes weighing 1.8–3.2kg (4 to 7 pounds), 25- to 40-size 3D airplanes up to 2.2kg (5 pounds), or models requiring up to 925 watts of power.

Features:

Equivalent to 40- to 46-size glow engine for planes weighing 1.8–3.2kg (4–7lb)
Ideal for 25- to 40-size 3D airplanes up to 2.2kg (5 lb)
Ideal for models requiring up to 925 watts of power
High-torque, direct-drive alternative to inrunner brushless motors
Includes mount, prop adapters and mounting hardware
External rotor design—6mm shaft can easily be reversed for alternative motor installations
Slotted 12-pole outrunner design
High-quality construction with ball bearings and hardened steel shaft
Quiet, lightweight operation

Specifications:

Type: Brushless outrunner
Size: Replacement for 40- to 46-size glow engines
Bearings or Bushings: One 6 x 15 x 5mm Bearing, and Two 6 x 12 x 4mm Bearing
Wire Gauge: 14
Recommended Prop Range: 12×8 to 14×10
Voltage: 14.4 to 19.2
RPM/Volt (Kv): 670
Resistance (Ri): .04 ohms
Idle Current (Io): 3.90A @ 10V
Shaft Diameter: 6mm (.24 in)
Overall Length: 55mm (2.15 in)
Weight: 290 g (10.0 oz)
Overall Diameter: 50mm (2.00 in)
Diameter: 50mm (2 in)
Length: 55mm (2.15 in)
Continuous Current: 40A
Maximum Burst Current: 55A (15 sec)
Cells: 12–16 Ni-MH/Ni-Cd or 4–5S Li-Po
Speed Control: 60A brushless

Additional information

Weight 0.501 kg
Dimensions 10 × 5 × 10 cm

Reviews

There are no reviews yet.

Be the first to review “E-Flite Power 46 Brushless Outrunner Motor, 670Kv”

Your email address will not be published. Required fields are marked *

Translate »