Park 180 Brushless Outrunner Motor, 2200Kv
Ideal for 3D models 2–3 oz (55–85 g), and sport and scale models 3–6 oz (85– 170 g) or models requiring up to 30 watts of power.
Features
Ideal for 3D models weighing 2–3 oz (55–85 g) and sport and scale models weighing 3–6 oz (85–170 g)
Ideal for indoor and outdoor small aerobatic park flyers
Extremely quiet and lightweight—just .3 oz (8.5 g)
High-torque, direct-drive alternative to inrunner brushless motors
Designed for firewall mount or carbon tube mount
4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
Up to 30 watts
Includes prop adapter
Includes mount, mounting hardware and 2mm gold BL connectors
Upgraded performance for indoor motors
High-quality construction with ball bearings and hardened steel shaft
Specifications
Type: Brushless outrunner
Size: 180
Bearings or Bushings: Two 1.5 x 4 x 2mm Bearings
Recommended Prop Range: 3×3 to 6×3 ‘Direct Drive’ for 2S or 4×4 or 4.5×3 for 3S
Voltage: 4.8–11.4V
RPM/Volt (Kv): 2200
Resistance (Ri): .91 ohms
Idle Current (Io): .30A @ 8V
Continuous Current: 2.6A
Maximum Burst Current: 3.2A (15 sec)
Cells: 2–3S Li-Po or 4–8 Ni-Cd/Ni-MH
Speed Control: 4–6A brushless
Weight: 8.5 g (.30 oz)
Overall Diameter: 16mm (.63 in)
Shaft Diameter: 1.5mm
Overall Length: 20mm (.80 in)
Zac Apelt –
Very nice motor, very happy with it.
It is quiet and managed to put out about 160g of thrust on 2s 5030 prop.
Be careful of the wires, they are easy to damage but easy to fix. Specs are accurate.
Highly recommended if you are looking for a light and powerful motor.