Park 480 BL Outrunner Motor, 1020Kv
The Park 480 Brushless Outrunner motor is designed to deliver clean and quiet power for 3D park flyers 20- to 30-ounces (565- to 850-grams), scale park flyers 25- to 35-ounces (710- to 990-grams), or models requiring up to 275 watts of power. It’s an especially good match for E-flite’s Mini Edge 3D ARF and FuntanaX 3D ARF , and would provide extreme power for sport park flyers such as the Mini Ultra Stick ARF.
Specifically this 1020 Kv option can handle more current than the 920 Kv version so it is a much better option when match with the Thunder Power Pro-Lite cells.
Perfect match for 3D park flyers weighing 20–30 oz (565–850 g)
Ideal for scale park flyers 25–35 oz (710–990 g)
Ideal for models requiring up to 275 watts of power
High Torque, direct drive alternative to inrunner brushless motors
Includes mount, prop adapters, and mounting hardware
External rotor design, 4mm shaft can easily be reversed for alternative motor installations
Slotted 12-pole outrunner design
High quality construction with ball bearings and hardened steel shaft
Quiet, lightweight operation
Type: Brushless Outrunner
Size: Park Flyer
Bearings or Bushings: Ball Bearings
Wire Gauge: 16
Recommended Prop Range: 10×7 to 12×6
Voltage: 7.2 to 12
RPM/Volt (Kv): 1020
Resistance (Ri): .06 ohms
Idle Current (Io): 1.10A @ 8V
Continuous Current: 22A
Maximum Burst Current: 28A (15 sec)
Cells: 6 – 10 Ni-Cd/Ni-Mh or 2 – 3S Li-Po
Speed Control: CC Phoenix 25 – 35amp
Weight: 87g (3.1 oz)
Overall Diameter: 35mm (1.40 in)
Shaft Diameter: 4mm (.16 in)
Overall Length: 33mm (1.30 in)
This motor is more ideal for the Thunder Power Pro-Lite cells (ending in PL) because it can handle more current.
Maximum operating temperature: 220 deg Fahrenheit.
Adequate cooling is required for all motor operation at maximum current levels.
Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.