Park 250 Brushless Outrunner Motor 2200 Kv
The Park 250 ideal for 3D models 4-6 oz (115-170g), and sport and scale models 6-12 oz (170-340g) or models requiring up to 55 watts of power.
Ideal for 3D models 4–6 oz (115–170 g) and sport and scale models 6–12 oz (170–340 g)
Up to 55 watts
Designed for firewall mount or carbon tube mount
Integrated Prop Saver design
Extremely quiet and lightweight—just .5 ounces (14 grams)
Upgraded performance motor for indoor IPS and 180 motors
High-torque, direct-drive alternative to inrunners
Includes mount, mounting hardware and 2mm gold BL connectors
High-quality construction with ball bearings and hardened steel shaft
Great lightweight outrunner for small indoor foamies
Type: Brushless Outrunner
Size: Upgrade for 180-size
Bearings or Bushings: Bearings
Recommended Prop Range: 5.5×4.5 – 8×6 Slow Flyer
RPM/Volt (Kv): 2200
Resistance (Ri): .25 ohms
Idle Current (Io): .45A
Continuous Current: 7A
aximum Burst Current: 8A (15 sec)
Cells: 6 Ni-MH/Ni-Cd or 2 Li-Po
Speed Control: 6A – 10A Brushless
Weight: 14 g (0.5 oz)
Overall Diameter: 22mm (.85 in)
Overall Length: 23mm (.90 in)
Maximum operating temperature: 220 deg Fahrenheit.
Adequate cooling is required for all motor operation at maximum current levels.
Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.