Hyperion DSMX Compatible 7-Channel Receiver w/ 3-Axis Stabilisation

$46.50

Out of stock

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

This full-range DSMX compatible 7channel receiver with 3-axis stabilizer is a great solution for all models requiring up to 7 channels.

Out of stock

SKU: HP-DSMX7RXSTAB Category:

Description

Hyperion DSMX Compatible 7-Channel Receiver with 3-Axis Stabilisation

This full-range DSMX compatible 7ch receiver with 3-axis stabilizer is a great solution for all models requiring up to 7 channels (DSM2™, and DSMX™ are registered trademarks of Horizon Hobbies LLC.). This is a “simple” to integrate full rate-gyro stabilizer for electric models. This receiver is not an autopilot or self-leveling device, nor will it fly the plane for you. It is designed simply to smooth out flight and thus make flying in wind and turbulence a pleasure rather than a risk. Perfect for those looking for an affordable, yet high-quality DSMX compatible receiver with stabilization. Testing actually shows that Hyperion DSMX-compatible receivers provide more range than other similar products in the market.

Hyperion DSMX compatible receivers offer the latest generation with it’s Spread-Spectrum DSMX-style compatibility. Hyperion receivers only use high-quality original components, MCUs and with state of the art SMT automation to ensure a quality product every time. Every HP-DSMX7RXSTAB is manufactured using impedance matched PCBs with exact tuning to provide signal stability and range that exceeds any of the previous generation DSM2 compatible receivers.

Compatible Transmitters: – DSMX-type Transmitters

Features:
Channels: 7
Integrated 3-axis stabilization
Works with Satellite Receiver
Low latency response time:
Built-in Failsafe feature (programmed upon binding)

Specifications:
Frequency: 2.4Ghz DSMX (compatible)
Compatible with DSMX™ Aircraft radio and module systems. DSM2™, and DSMX™ are registered trademarks of Horizon Hobbies LLC.
Input voltage: 3.45 ~ 10.2v

 

Additional information

Weight .100 kg
Dimensions 10 × 5 × 3 cm

1 review for Hyperion DSMX Compatible 7-Channel Receiver w/ 3-Axis Stabilisation

  1. Rated 5 out of 5

    Mike O’Brien

    Great product! I purchased two of these receivers and have fitted one into a very small electric powered foam ugly stick and the other into a 25 size electric powered core-flute flying disc. Both models have been flown with the Hyperion receiver in “windy” conditions that would have grounded most pilots at my club with similar foamies. I set the sensitivity at approximately 30% on all the axis’s for a test run. Both the models performed GREAT and I haven’t needed to change the settings.

    I would highly recommend this product.

    Mike

Add a review

Your email address will not be published. Required fields are marked *

Translate »