E-Flite Power 10 Brushless Outrunner Motor 1100Kv

Power 10 BL Outrunner Motor, 1100 Kv

The Power 10 is designed to deliver clean and quiet power for 10-size sport and scale airplanes weighing 32- to 48-ounces (910- to 1360-grams), 3D airplanes 28- to 36-ounces (790- to 1020-grams), or models requiring up to 375 watts of power.

Features

Equivalent to a 10-size glow engine for 32–48 ounce (910–1360 g) airplanes
Ideal for 3D airplanes weighing 28–36 ounces (790–1020 g)
Ideal for models requiring up to 375 watts of power
High torque, direct drive alternative to inrunner brushless motors
Includes mount, prop adapters, and mounting hardware
External rotor design, 5mm shaft can easily be reversed for alternative motor installations
Slotted 12-pole outrunner design
High quality construction with ball bearings and hardened steel shaft
Quiet, lightweight operation

Specifications:

 Type: Brushless Outrunner Motor
Size: 10-size
Bearings or Bushings: Ball Bearings
Wire Gauge: 16
Recommended Prop Range: 10×5–12×6
Voltage: 7.2 – 12
RPM/Volt (Kv): 1100
Resistance (Ri): .043 ohms
Idle Current (Io): 2.10A @10V
Continuous Current: 30A
Maximum Burst Current: 38A (15 sec)
Cells: 6–10 Ni-MH/Ni-Cd or 2–3S Li-Po
Speed Control: 35A to 40A Brushless
Weight: 122g (4.3 oz)
Overall Diameter: 35mm (1.40 in)
Shaft Diameter: 5mm (.20 in)
Overall Length: 43mm (1.60 in)

Tech Notes

* Maximum Operating Temperature: 220 degrees Fahrenheit
* Adequate cooling is required for all motor operation at maximum current levels.
* Maximum Burst Current duration is 15 seconds. Adequate time between maximum burst intervals is required for proper cooling and to avoid overheating the motor.
* Maximum Burst Current rating is for 3D and limited motor run flights. Lack of proper throttle management may result in damage to the motor since excessive use of burst current may overheat the motor.

Examples of Airplane Setups:

NOTE: All data measured at full throttle. Actual performance may vary depending on battery and flight conditions.
E-flite Brio 10 ARF

Option 1:
Motor: Power 10
ESC: E-flite 40A Brushless (V2) (EFLA312B)
Prop: APC 12x6E (APC12060E)
Battery: Thunder Power PRO LITE 2100mAh 11.1V 3-Cell (THP21003SPL)
Flying Weight w/Battery: 2.1 lbs

Amps Volts Watts Input Watts/Pound RPM
37.2 9.6 357 170 7800

Expect good speed and extreme vertical power for artistic aerobatics. Average duration is approximately 6-9 minutes depending on throttle management.

Option 2:
Motor: Power 10
ESC: E-flite 40A Brushless (V2) (EFLA312B)
Prop: APC 11×5.5E (APC11055E)
Battery: Thunder Power PRO LITE 2100mAh 11.1V 3-Cell (THP21003SPL)
Flying Weight w/Battery: 2.1 lbs

Amps Volts Watts Input Watts/Pound RPM
33.0 9.8 323 153 8700

Expect high speeds and strong vertical performance ideal for F3A precision and artistic aerobatics. Average duration is approximately 7-10 minutes depending on throttle management.