Park 300 Brushless Outrunner Motor, 1380 kV
Ideal for 3D models 6-9 oz (170-255g), and sport and scale models 8-12 oz (225-340g) or models requiring up to 85 watts of power.
Features:
Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
High-torque, direct-drive alternative to inrunner brushless motors
Ideal for models requiring up to 85 watts of power
Integrated prop saver design
Mount, prop adapter and hardware included
External rotor design with 3.2mm shaft
Low noise level
Specifications:
Type: Brushless Outrunner
Size: 180 / 280 replacement
Bearings or Bushings: Ball Bearings
Recommended Prop Range: 6×5 to 8×3.8 (3-cells) or Up to 10×3.8 (2-cells) Slow Flyer
Voltage: 7.2 – 11.1V
RPM/Volt (Kv): 1380
Resistance (Ri): .33 ohms
Idle Current (Io): .40A @ 8V
Continuous Current: 7A
Maximum Burst Current: 9A (15 sec)
Cells: 6-8 Ni-Cd/Ni-MH or 2-3S Li-Po
Speed Control: 8-10A Brushless
Weight: 24g (.8 oz)
Overall Diameter: 28mm (1.10 in)
Shaft Diameter: 3.17mm (1/8 in)
Overall Length: 22mm (.90 in)
Tech Notes:
Maximum operating temperature: 220 deg Fahrenheit.
Adequate cooling is required for all motor operation at maximum current levels.
Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.
Reviews
There are no reviews yet.