Wired RC

We will be closed from 2pm Friday 29th April, reopening Tuesday 3rd May.
Subtotal: $0.00

No products in the cart.

Subtotal: $0.00

No products in the cart.

E-flite Cirrus SR22T 1.5m BNF Basic


SKU EFL5950 Categories ,

Out of stock

E-flite Cirrus SR22T 1.5m BNF Basic

The E-Flite Cirrus SR22T is a replica of the sleek civilian aircraft, the SR22. E-flite has brought the SR22T to the RC market faithfully emulating the profile with excellent features and scale appeal.

The scale lighting package includes flashing tail and landing LED lights and interior cabin lights. The wing is easy to install thanks to the hands-free servo connect system. The durable tricycle landing gear and oversized wheels make takeoffs on most surfaces simple. The 10-size brushless motor creates a power system that creates ample power and thrust.

Key Features

  • Officially licensed model
  • Scale detail including steps, handles and removable antenna
  • Fully operational flaps with scale hinging
  • Quick assembly
  • Hands-free quick wing connect system
  • Ample speed and power with a 10-size brushless motor
  • AS3X and SAFE offer stability and support
  • Motor, ESC and servos preinstalled

Kit Contents

  • E-flite Cirrus SR22T BNF Basic 1524mm (60″) Wingspan
  • Spektrum™ AS3X® receiver with optional SAFE® Select technology

Needed to Complete

  • 6 Channel Spektrum Compatible Radio
  • 3 Cell 11.1V 2200mAh
  • 3 Cell Compatible Battery Charger


Wingspan: 60in / 1524mm
Length: 41in / 1041.4mm
Flying Weight: 57.60oz / 1633g-1845g
CG (Centre of Gravity) 63.5mm (+/- 3mm) from the leading edge of the wing at the root
Power System: 10-Sized Brushless outrunner (installed)
Electronic Speed Control: 40A with EC3 Connector
Propeller / EDF: 3 blade propeller
Servos: 9g
Landing Gear: Fixed with wheel pants
Required Battery: 3 Cell 11.1V 2200mAh – 3000mAh Li-Po Battery with EC3 connector (required)
Required Radio: 6+ channel DSMX transmitter (required)
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: Yes
Lights: Yes
Hinge Type: Foam
Material: Foam
Skill Level: Intermediate
Build Time: Less than an hour
Recommended: Environment Outdoor

Weight 4.2 kg
Dimensions 107 × 32 × 26 cm

2 reviews for E-flite Cirrus SR22T 1.5m BNF Basic

  1. cameron dauth

    A well constructed and finished model that will please anyone looking for a scale-like version of the Cirrus. Went together very easily and flies very sweetly and predictably. Adequate power on the 3 cell battery recommended for scale flying, or even for a little bit of mild aerobatics. The enhancement from the included AS3X receiver is nice, but honestly I think this model would fly just as well without any assistance from gyro equipped receivers… because it is just that well behaved. Beautiful to fly just on daybreak due to the abundance of super bright LEDs pre-installed on the wings, fuselage and under the nose. The pre-installed fowler flaps also allow you to fly at almost walking pace if you so desire and make landings very easy and controllable. Make sure though that you power up on the ground to at least 25% throttle or more to activate the AS3X prior to take off roll out.
    All in all a nicely finished, easy to put together and fly model which looks as nice in the air as it does on the ground.

  2. Norm. B

    I agree with everything in the previous review. Not much else I can say except mine flies with a little up elevator and it took a couple of test flights to get the flap / elevator ratios right. I found I needed a little more down elevator in the mix for smooth transition. All up a good looking model that flies as good as it looks.

Add a review

Your email address will not be published.

Shopping Cart
Translate »
Scroll to Top