Arrows Hobby F-15 Eagle Twin 64mm EDF PNP

Arrows Hobby F-15 Eagle Twin 64mm EDF PNP

The Arrows Hobby F-15 Eagle twin 64mm EDF was designed using hundreds of photos and aircraft design files. Built from high-strength EPO material, no detail was missed in the design of this faithful replica.

A fan of scale? The Arrows F-15 has electric CNC retracts, functional flaps, LED navigation lights, pilot figure, antennae, machine guns, auxiliary fuel tanks, missiles and numerous other scale components. A magnetic nose cone and latch-type canopy allow these components to stay in place even in high-G maneuvers.

Power comes courtesy of two 12 bladed 64mm EDFs (using 2840-2280KV motors), with dual 40A ESCs and a 22.2V 3300mAh 35C battery pack. This power system gives the aircraft a turbine-like note and ultra-high power-to-weight ratio.

With its twin 64mm EDF power system, large wing area and highly strengthened wing structure—the Arrows F-15 can perform advanced aerobatic flight maneuvers along with exceptional high alpha capabilities without losing control surface authority.

Painted in the Oregon air national guard F-15C trim scheme, this is one of the most attractive F-15 Eagles on the market today.

Features

• Dual 12-bladed 64mm EDFs, dual 2840 2280KV motors, dual 40A ESC with external 5.5V 5A BEC
• Highly realistic scale components: Electric CNC retracts, functional flaps, LED navigation lights, pilot figure, antennae, machine guns, auxiliary fuel tanks and missiles
• Screw-together assembly, magnetic nose cone, latch-type canopy and ball-link pushrods
• Electric CNC retracts with over-current protection
• Carbon reinforced airframe
• Fantastic low-speed performance and aerobatic capabilities

Kit Contents

1x Factory assembled pre-painted fuselage with decals applied
1x Pre-painted 2-piece wing set with decals applied
1x Pre-painted 2-piece tailplane set with decals applied
1x Pre-painted 2-piece fin set with decals applied
1x Detachable nose cone
2x Pre-installed 2840 2280KV brushless motors
2x Pre-installed 40A ESCs with single EC5 connector
9x Pre-installed high-quality 9g digital servos
2x Pre-installed 64mm 12-blade fans
1x Screw and pushrod set
1x 2-piece detachable missile set
1x Main wing spar
1x Comprehensive instruction manual

Needed to Complete

Full-range 6-Channel radio transmitter
Full-range 6-Channel receiver
6-Cell 22.2V 3300mAh LiPo battery
6-Cell compatible battery charger

Specifications

Approximate Flying Duration: 4 min
Wingspan: 900mm (35.4in)
Length: 1345mm (53in)
CG (Center of Gravity): 125-135mm from the leading edge
Power System: Brushless 2840-2280kV x2 units
Electronic Speed Control: Twin 40A ESC with 5.5V 5A BEC
EDF: 64mm 12 blade EDF unit (x2 units)
Servos: 9g plastic servos x 9 units
Landing Gear: Electronic retractable main gear
Required Battery: 22.2V 3300mAh 35C
Required Radio: 6 Channel transmitter and receiver required
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: Yes